(2006-08-06) rescue-bootcd

CD/boot/isolinux/isolinux.cfg

@@ -0,0 +1,2 @@
+default /boot/bzimage initrd=/boot/rootfs.gz
+

build_all.sh

@@ -0,0 +1,8 @@
+./build_initrd.sh
+
+mv rootfs.gz CD/boot/rootfs.gz
+
+
+rdev CD/boot/bzimage /dev/ram0
+
+mkisofs -o bootcd.iso -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table CD

build_initrd.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+# crear la imagen del rootfs
+dd if=/dev/zero of=file.rootfs bs=1k count=4096
+mke2fs -F -m 0 -N 2000 file.rootfs
+
+
+#################################
+# montar y copiar los ficheros
+#################################
+mount -t ext2 -o loop file.rootfs tmp.mountp
+cp -dRvp rootfs/* tmp.mountp/
+umount tmp.mountp
+
+# comprimir
+dd if=file.rootfs bs=1k | gzip -v9 > rootfs.gz
+# borrar fichero temporal
+rm file.rootfs

extra/busybox-1.00/.config

@@ -0,0 +1,499 @@
+#
+# Automatically generated make config: don't edit
+#
+HAVE_DOT_CONFIG=y
+
+#
+# General Configuration
+#
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_FEATURE_DEVFS=y
+CONFIG_FEATURE_DEVPTS=y
+CONFIG_FEATURE_CLEAN_UP=y
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_SELINUX is not set
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_LFS=y
+# USING_CROSS_COMPILER is not set
+EXTRA_CFLAGS_OPTIONS=""
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+PREFIX="./_install"
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
+CONFIG_BUNZIP2=y
+CONFIG_CPIO=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+# CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+# CONFIG_CAL is not set
+CONFIG_CAT=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CMP=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_EXPR=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_OD=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_STTY=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+
+#
+# test (forced enabled for use with shell)
+#
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+# CONFIG_UUDECODE is not set
+# CONFIG_UUENCODE is not set
+# CONFIG_WATCH is not set
+CONFIG_WC=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls and more
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_SETKEYCODES=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_READLINK=y
+# CONFIG_RUN_PARTS is not set
+# CONFIG_START_STOP_DAEMON is not set
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INITRD=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_EXTRA_QUIET is not set
+CONFIG_HALT=y
+CONFIG_POWEROFF=y
+CONFIG_REBOOT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_USE_BB_PWD_GRP=y
+CONFIG_ADDGROUP=y
+CONFIG_DELGROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_U_W_TMP=y
+CONFIG_LOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_SU=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Common options for adduser, deluser, login, su
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+# CONFIG_CROND is not set
+# CONFIG_CRONTAB is not set
+CONFIG_DC=y
+CONFIG_DEVFSD=y
+CONFIG_DEVFSD_MODLOAD=y
+CONFIG_DEVFSD_FG_NP=y
+CONFIG_DEVFSD_VERBOSE=y
+CONFIG_LAST=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
+# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+CONFIG_MT=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_TIME=y
+CONFIG_WATCHDOG=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+CONFIG_LSMOD=y
+CONFIG_MODPROBE=y
+CONFIG_RMMOD=y
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+
+#
+# Networking Utilities
+#
+# CONFIG_FEATURE_IPV6 is not set
+CONFIG_ARPING=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+# CONFIG_IFUPDOWN is not set
+# CONFIG_INETD is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+
+#
+#   address (forced enabled for ipaddr)
+#
+CONFIG_FEATURE_IP_LINK=y
+
+#
+#   link (forced enabled for iplink)
+#
+CONFIG_FEATURE_IP_ROUTE=y
+
+#
+#   route (forced enabled for iproute)
+#
+CONFIG_FEATURE_IP_TUNNEL=y
+
+#
+#   tunnel (forced enabled for iptunnel)
+#
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_NAMEIF=y
+CONFIG_NC=y
+CONFIG_NETSTAT=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+# CONFIG_TELNETD is not set
+# CONFIG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_VCONFIG is not set
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
+
+#
+# udhcp Server/Client
+#
+CONFIG_UDHCPD=y
+CONFIG_UDHCPC=y
+# CONFIG_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCP_SYSLOG is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_PIDOF=y
+CONFIG_PS=y
+CONFIG_RENICE=y
+CONFIG_TOP=y
+FEATURE_CPU_USAGE_PERCENTAGE=y
+CONFIG_UPTIME=y
+CONFIG_SYSCTL=y
+
+#
+# Another Bourne-like Shell
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+# CONFIG_ASH_GETOPTS is not set
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+# CONFIG_HUSH is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
+CONFIG_FEATURE_COMMAND_EDITING=y
+CONFIG_FEATURE_COMMAND_HISTORY=15
+CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
+CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
+# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_SH_FANCY_PROMPT=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+# CONFIG_GETOPT is not set
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y
+CONFIG_LOSETUP=y
+CONFIG_MKSWAP=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_SWAPONOFF=y
+CONFIG_MOUNT=y
+CONFIG_NFSMOUNT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_MOUNT_FORCE=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+CONFIG_FEATURE_MTAB_FILENAME="/etc/mtab"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set

extra/busybox-1.00/.config.cmd

@@ -0,0 +1,22 @@
+deps_config := \
+	util-linux/Config.in \
+	sysklogd/Config.in \
+	shell/Config.in \
+	procps/Config.in \
+	networking/udhcp/Config.in \
+	networking/Config.in \
+	modutils/Config.in \
+	miscutils/Config.in \
+	loginutils/Config.in \
+	init/Config.in \
+	findutils/Config.in \
+	editors/Config.in \
+	debianutils/Config.in \
+	console-tools/Config.in \
+	coreutils/Config.in \
+	archival/Config.in \
+	/home/lfs-kable/bootcd/extra/busybox-1.00/sysdeps/linux/Config.in
+
+.config include/config.h: $(deps_config)
+
+$(deps_config):

extra/busybox-1.00/.config.old

@@ -0,0 +1,499 @@
+#
+# Automatically generated make config: don't edit
+#
+HAVE_DOT_CONFIG=y
+
+#
+# General Configuration
+#
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+CONFIG_FEATURE_DEVFS=y
+CONFIG_FEATURE_DEVPTS=y
+CONFIG_FEATURE_CLEAN_UP=y
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_SELINUX is not set
+
+#
+# Build Options
+#
+CONFIG_STATIC=y
+CONFIG_LFS=y
+# USING_CROSS_COMPILER is not set
+EXTRA_CFLAGS_OPTIONS=""
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+PREFIX="./_install"
+
+#
+# Archival Utilities
+#
+CONFIG_AR=y
+# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
+CONFIG_BUNZIP2=y
+CONFIG_CPIO=y
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+CONFIG_GUNZIP=y
+CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
+CONFIG_GZIP=y
+# CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+CONFIG_FEATURE_TAR_FROM=y
+CONFIG_FEATURE_TAR_GZIP=y
+CONFIG_FEATURE_TAR_COMPRESS=y
+CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_UNCOMPRESS=y
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+# CONFIG_CAL is not set
+CONFIG_CAT=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CMP=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_EXPR=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+CONFIG_LENGTH=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_OD=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_SORT=y
+CONFIG_STTY=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TEST=y
+
+#
+# test (forced enabled for use with shell)
+#
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_TR=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+# CONFIG_UUDECODE is not set
+# CONFIG_UUENCODE is not set
+# CONFIG_WATCH is not set
+CONFIG_WC=y
+CONFIG_WHO=y
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls and more
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_SETKEYCODES=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_READLINK=y
+# CONFIG_RUN_PARTS is not set
+# CONFIG_START_STOP_DAEMON is not set
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_AWK=y
+CONFIG_FEATURE_AWK_MATH=y
+CONFIG_PATCH=y
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_NEWER=y
+CONFIG_FEATURE_FIND_INUM=y
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+# CONFIG_FEATURE_INITRD is not set
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+# CONFIG_FEATURE_EXTRA_QUIET is not set
+CONFIG_HALT=y
+CONFIG_POWEROFF=y
+CONFIG_REBOOT=y
+CONFIG_MESG=y
+
+#
+# Login/Password Management Utilities
+#
+CONFIG_USE_BB_PWD_GRP=y
+CONFIG_ADDGROUP=y
+CONFIG_DELGROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+CONFIG_FEATURE_U_W_TMP=y
+CONFIG_LOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_SU=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Common options for adduser, deluser, login, su
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_SHADOW is not set
+
+#
+# Miscellaneous Utilities
+#
+CONFIG_ADJTIMEX=y
+# CONFIG_CROND is not set
+# CONFIG_CRONTAB is not set
+CONFIG_DC=y
+CONFIG_DEVFSD=y
+CONFIG_DEVFSD_MODLOAD=y
+CONFIG_DEVFSD_FG_NP=y
+CONFIG_DEVFSD_VERBOSE=y
+CONFIG_LAST=y
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
+# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
+CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
+CONFIG_MAKEDEVS=y
+CONFIG_MT=y
+CONFIG_RX=y
+CONFIG_STRINGS=y
+CONFIG_TIME=y
+CONFIG_WATCHDOG=y
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+CONFIG_FEATURE_2_4_MODULES=y
+CONFIG_FEATURE_2_6_MODULES=y
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+CONFIG_LSMOD=y
+CONFIG_MODPROBE=y
+CONFIG_RMMOD=y
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+
+#
+# Networking Utilities
+#
+# CONFIG_FEATURE_IPV6 is not set
+CONFIG_ARPING=y
+CONFIG_FTPGET=y
+CONFIG_FTPPUT=y
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
+# CONFIG_IFUPDOWN is not set
+# CONFIG_INETD is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+
+#
+#   address (forced enabled for ipaddr)
+#
+CONFIG_FEATURE_IP_LINK=y
+
+#
+#   link (forced enabled for iplink)
+#
+CONFIG_FEATURE_IP_ROUTE=y
+
+#
+#   route (forced enabled for iproute)
+#
+CONFIG_FEATURE_IP_TUNNEL=y
+
+#
+#   tunnel (forced enabled for iptunnel)
+#
+CONFIG_IPCALC=y
+CONFIG_FEATURE_IPCALC_FANCY=y
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_NAMEIF=y
+CONFIG_NC=y
+CONFIG_NETSTAT=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+# CONFIG_TELNETD is not set
+# CONFIG_TFTP is not set
+CONFIG_TRACEROUTE=y
+CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
+# CONFIG_VCONFIG is not set
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
+
+#
+# udhcp Server/Client
+#
+CONFIG_UDHCPD=y
+CONFIG_UDHCPC=y
+# CONFIG_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCP_SYSLOG is not set
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_PIDOF=y
+CONFIG_PS=y
+CONFIG_RENICE=y
+CONFIG_TOP=y
+FEATURE_CPU_USAGE_PERCENTAGE=y
+CONFIG_UPTIME=y
+CONFIG_SYSCTL=y
+
+#
+# Another Bourne-like Shell
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+# CONFIG_ASH_GETOPTS is not set
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+# CONFIG_HUSH is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
+CONFIG_FEATURE_COMMAND_EDITING=y
+CONFIG_FEATURE_COMMAND_HISTORY=15
+CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
+CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
+# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_SH_FANCY_PROMPT=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+CONFIG_FBSET=y
+CONFIG_FEATURE_FBSET_FANCY=y
+CONFIG_FEATURE_FBSET_READMODE=y
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_FREERAMDISK=y
+CONFIG_FSCK_MINIX=y
+CONFIG_MKFS_MINIX=y
+
+#
+# Minix filesystem support
+#
+CONFIG_FEATURE_MINIX2=y
+# CONFIG_GETOPT is not set
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y
+CONFIG_LOSETUP=y
+CONFIG_MKSWAP=y
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_SWAPONOFF=y
+CONFIG_MOUNT=y
+CONFIG_NFSMOUNT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_MOUNT_FORCE=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MTAB_SUPPORT=y
+CONFIG_FEATURE_MTAB_FILENAME="/etc/mtab"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set

extra/busybox-1.00/.cvsignore

@@ -0,0 +1,7 @@
+busybox
+busybox.links
+_install
+.config
+.menuconfig.log
+.config.cmd
+.config.old

extra/busybox-1.00/.indent.pro

@@ -0,0 +1,33 @@
+--blank-lines-after-declarations
+--blank-lines-after-procedures
+--break-before-boolean-operator
+--no-blank-lines-after-commas
+--braces-on-if-line
+--braces-on-struct-decl-line
+--comment-indentation25
+--declaration-comment-column25
+--no-comment-delimiters-on-blank-lines
+--cuddle-else
+--continuation-indentation4
+--case-indentation0
+--else-endif-column33
+--space-after-cast
+--line-comments-indentation0
+--declaration-indentation1
+--dont-format-first-column-comments
+--dont-format-comments
+--honour-newlines
+--indent-level4
+/* changed from 0 to 4 */
+--parameter-indentation4
+--line-length78 /* changed from 75 */
+--continue-at-parentheses
+--no-space-after-function-call-names
+--dont-break-procedure-type
+--dont-star-comments
+--leave-optional-blank-lines
+--dont-space-special-semicolon
+--tab-size4
+/* additions by Mark */
+--case-brace-indentation0
+--leave-preprocessor-space

extra/busybox-1.00/AUTHORS

@@ -0,0 +1,133 @@
+List of the authors of code contained in BusyBox.
+
+If you have code in BusyBox, you should be listed here.  If you should be
+listed, or the description of what you have done needs more detail, or is
+incorect, _please_ let me know.
+
+ -Erik
+
+-----------
+
+Emanuele Aina <emanuele.aina@tiscali.it>
+    run-parts
+
+Erik Andersen <andersen@codepoet.org>
+    Tons of new stuff, major rewrite of most of the
+    core apps, tons of new apps as noted in header files.
+    Lots of tedious effort writing these boring docs that
+    nobody is going to actually read.
+
+Laurence Anderson <l.d.anderson@warwick.ac.uk>
+    rpm2cpio, unzip, get_header_cpio, read_gz interface, rpm
+
+Jeff Angielski <jeff@theptrgroup.com>
+    ftpput, ftpget
+
+Edward Betts <edward@debian.org>
+    expr, hostid, logname, whoami
+
+John Beppu <beppu@codepoet.org>
+    du, nslookup, sort
+
+Brian Candler <B.Candler@pobox.com>
+    tiny-ls(ls)
+
+Randolph Chung <tausq@debian.org>
+    fbset, ping, hostname
+
+Dave Cinege <dcinege@psychosis.com>
+    more(v2), makedevs, dutmp, modularization, auto links file,
+    various fixes, Linux Router Project maintenance
+
+Jordan Crouse <jordan@cosmicpenguin.net>
+    ipcalc
+
+Magnus Damm <damm@opensource.se>
+    tftp client
+    insmod powerpc support
+
+Larry Doolittle <ldoolitt@recycle.lbl.gov>
+    pristine source directory compilation, lots of patches and fixes.
+
+Glenn Engel <glenne@engel.org>
+    httpd
+
+Gennady Feldman <gfeldman@gena01.com>
+    Sysklogd (single threaded syslogd, IPC Circular buffer support,
+    logread), various fixes.
+
+Robert Griebl <sandman@handhelds.org>
+    modprobe, hwclock, suid/sgid handling, tinylogin integration
+    many bugfixes and enhancements
+
+Karl M. Hegbloom <karlheg@debian.org>
+    cp_mv.c, the test suite, various fixes to utility.c, &c.
+
+Daniel Jacobowitz <dan@debian.org>
+    mktemp.c
+
+Matt Kraai <kraai@alumni.cmu.edu>
+    documentation, bugfixes, test suite
+
+Stephan Linz <linz@li-pro.net>
+    ipcalc, Red Hat equivalence
+
+John Lombardo <john@deltanet.com>
+    tr
+
+Glenn McGrath <bug1@iinet.net.au>
+    Common unarchving code and unarchiving applets, ifupdown, ftpgetput,
+    nameif, sed, patch, fold, install, uudecode. 
+    Various bugfixes, review and apply numerous patches. 
+
+Manuel Novoa III <mjn3@codepoet.org>
+    cat, head, mkfifo, mknod, rmdir, sleep, tee, tty, uniq, usleep, wc, yes,
+    mesg, vconfig, make_directory, parse_mode, dirname, mode_string,
+    get_last_path_component, simplify_path, and a number trivial libbb routines
+
+    also bug fixes, partial rewrites, and size optimizations in
+    ash, basename, cal, cmp, cp, df, du, echo, env, ln, logname, md5sum, mkdir,
+    mv, realpath, rm, sort, tail, touch, uname, watch, arith, human_readable,
+    interface, dutmp, ifconfig, route
+
+Vladimir Oleynik <dzo@simtreas.ru>
+    cmdedit; xargs(current), httpd(current);
+    ports: ash, crond, fdisk, inetd, stty, traceroute, top;
+    locale, various fixes
+    and irreconcilable critic of everything not perfect.
+
+Bruce Perens <bruce@pixar.com>
+    Original author of BusyBox in 1995, 1996. Some of his code can
+    still be found hiding here and there...
+
+Tim Riker <Tim@Rikers.org>
+    bug fixes, member of fan club
+
+Kent Robotti <robotti@metconnect.com>
+    reset, tons and tons of bug reports and patches.
+
+Chip Rosenthal <chip@unicom.com>, <crosenth@covad.com>
+    wget - Contributed by permission of Covad Communications
+
+Pavel Roskin <proski@gnu.org>
+    Lots of bugs fixes and patches.
+
+Gyepi Sam <gyepi@praxis-sw.com>
+    Remote logging feature for syslogd
+
+Linus Torvalds <torvalds@transmeta.com>
+    mkswap, fsck.minix, mkfs.minix
+
+Mark Whitley <markw@codepoet.org>
+    grep, sed, cut, xargs(previous),
+    style-guide, new-applet-HOWTO, bug fixes, etc.
+
+Charles P. Wright <cpwright@villagenet.com>
+    gzip, mini-netcat(nc)
+
+Enrique Zanardi <ezanardi@ull.es>
+    tarcat (since removed), loadkmap, various fixes, Debian maintenance
+
+Tito Ragusa <farmatito@tiscali.it>
+    devfsd and size optimizations in strings, openvt, chvt, deallocvt, hdparm and fdformat.
+

extra/busybox-1.00/INSTALL

@@ -0,0 +1,20 @@
+1) Run 'make config' or 'make menuconfig' and select the
+   functionality that you wish to enable.
+
+2) Run 'make dep'
+
+3) Check the Makefile for any Makefile setting you wish
+    to adjust for your system (things like like setting
+    your cross compiler, adjusting optimizations, etc)
+
+4) Run 'make'
+
+5) Go get a drink of water, drink a soda, visit the bathroom,
+    or whatever while it compiles.  It doesn't take very
+    long to compile, so you don't really need to waste too
+    much time waiting...
+
+6) Run 'make install' or 'make PREFIX=/target install' to
+    install busybox and all the needed links.  Some people
+    will prefer to install using hardlinks and will instead
+    want to run 'make install-hardlinks'....

extra/busybox-1.00/LICENSE

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

extra/busybox-1.00/Makefile

@@ -0,0 +1,315 @@
+# Makefile for busybox
+#
+# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+#--------------------------------------------------------------
+# You shouldn't need to mess with anything beyond this point...
+#--------------------------------------------------------------
+noconfig_targets := menuconfig config oldconfig randconfig \
+	defconfig allyesconfig allnoconfig clean distclean \
+	release tags  
+
+ifndef TOPDIR
+TOPDIR=$(CURDIR)/
+endif
+ifndef top_srcdir
+top_srcdir=$(CURDIR)
+endif
+ifndef top_builddir
+top_builddir=$(CURDIR)
+endif
+
+srctree=$(top_srcdir)
+vpath %/Config.in $(srctree)
+
+include $(top_builddir)/Rules.mak
+
+DIRS:=applets archival archival/libunarchive coreutils console-tools \
+	debianutils editors findutils init miscutils modutils networking \
+	networking/libiproute networking/udhcp procps loginutils shell \
+	sysklogd util-linux libpwdgrp coreutils/libcoreutils libbb
+
+SRC_DIRS:=$(patsubst %,$(top_srcdir)/%,$(DIRS))
+
+ifeq ($(strip $(CONFIG_SELINUX)),y)
+CFLAGS += -I/usr/include/selinux
+LIBRARIES += -lsecure
+endif
+
+CONFIG_CONFIG_IN = $(top_srcdir)/sysdeps/$(TARGET_OS)/Config.in
+CONFIG_DEFCONFIG = $(top_srcdir)/sysdeps/$(TARGET_OS)/defconfig
+
+ALL_DIRS:= $(DIRS) scripts/config
+ALL_MAKEFILES:=$(patsubst %,%/Makefile,$(ALL_DIRS))
+
+ifeq ($(KBUILD_SRC),)
+
+ifdef O
+  ifeq ("$(origin O)", "command line")
+    KBUILD_OUTPUT := $(O)
+  endif
+endif
+
+# That's our default target when none is given on the command line
+.PHONY: _all
+_all:
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(wildcard $(KBUILD_OUTPUT)),, \
+     $(error output directory "$(saved-output)" does not exist))
+
+.PHONY: $(MAKECMDGOALS)
+
+$(filter-out _all,$(MAKECMDGOALS)) _all: $(KBUILD_OUTPUT)/Rules.mak $(KBUILD_OUTPUT)/Makefile
+	$(MAKE) -C $(KBUILD_OUTPUT) \
+	top_srcdir=$(CURDIR) \
+	top_builddir=$(KBUILD_OUTPUT) \
+	TOPDIR=$(KBUILD_OUTPUT)	\
+	KBUILD_SRC=$(CURDIR) \
+	-f $(CURDIR)/Makefile $@
+
+$(KBUILD_OUTPUT)/Rules.mak:
+	@echo > $@
+	@echo top_srcdir=$(CURDIR) >> $@
+	@echo top_builddir=$(KBUILD_OUTPUT) >> $@
+	@echo include $(top_srcdir)/Rules.mak >> $@
+
+$(KBUILD_OUTPUT)/Makefile:
+	@echo > $@
+	@echo top_srcdir=$(CURDIR) >> $@
+	@echo top_builddir=$(KBUILD_OUTPUT) >> $@
+	@echo KBUILD_SRC='$$(top_srcdir)' >> $@
+	@echo include '$$(KBUILD_SRC)'/Makefile >> $@
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+ifeq ($(skip-makefile),)
+
+_all: all
+
+ifeq ($(strip $(HAVE_DOT_CONFIG)),y)
+
+all: busybox busybox.links doc
+
+all_tree:	$(ALL_MAKEFILES)
+
+$(ALL_MAKEFILES): %/Makefile: $(top_srcdir)/%/Makefile
+	d=`dirname $@`; [ -d "$$d" ] || mkdir -p "$$d"; cp $< $@
+
+# In this section, we need .config
+-include $(top_builddir)/.config.cmd
+include $(patsubst %,%/Makefile.in, $(SRC_DIRS))
+-include $(top_builddir)/.depend
+
+busybox: $(ALL_MAKEFILES) .depend include/config.h $(libraries-y)
+	$(CC) $(LDFLAGS) -o $@ -Wl,--start-group $(libraries-y) $(LIBRARIES) -Wl,--end-group
+	$(STRIPCMD) $@
+
+busybox.links: $(top_srcdir)/applets/busybox.mkll include/config.h $(top_srcdir)/include/applets.h
+	- $(SHELL) $^ >$@
+
+install: applets/install.sh busybox busybox.links
+	$(SHELL) $< $(PREFIX)
+ifeq ($(strip $(CONFIG_FEATURE_SUID)),y)
+	@echo
+	@echo
+	@echo --------------------------------------------------
+	@echo You will probably need to make your busybox binary
+	@echo setuid root to ensure all configured applets will
+	@echo work properly.
+	@echo --------------------------------------------------
+	@echo
+endif
+
+uninstall: busybox.links
+	rm -f $(PREFIX)/bin/busybox
+	for i in `cat busybox.links` ; do rm -f $(PREFIX)$$i; done
+
+install-hardlinks: applets/install.sh busybox busybox.links
+	$(SHELL) $< $(PREFIX) --hardlinks
+
+check: busybox
+	bindir=$(top_builddir) srcdir=$(top_srcdir)/testsuite \
+	$(top_srcdir)/testsuite/runtest
+
+# Documentation Targets
+doc: docs/busybox.pod docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html
+
+docs/busybox.pod : $(top_srcdir)/docs/busybox_header.pod $(top_srcdir)/include/usage.h $(top_srcdir)/docs/busybox_footer.pod
+	-mkdir -p docs
+	- ( cat $(top_srcdir)/docs/busybox_header.pod; \
+	    $(top_srcdir)/docs/autodocifier.pl $(top_srcdir)/include/usage.h; \
+	    cat $(top_srcdir)/docs/busybox_footer.pod ) > docs/busybox.pod
+
+docs/BusyBox.txt: docs/busybox.pod
+	@echo
+	@echo BusyBox Documentation
+	@echo
+	-mkdir -p docs
+	-pod2text $< > $@
+
+docs/BusyBox.1: docs/busybox.pod
+	- mkdir -p docs
+	- pod2man --center=BusyBox --release="version $(VERSION)" \
+		$< > $@
+
+docs/BusyBox.html: docs/busybox.net/BusyBox.html
+	- mkdir -p docs
+	-@ rm -f docs/BusyBox.html
+	-@ cp docs/busybox.net/BusyBox.html docs/BusyBox.html
+
+docs/busybox.net/BusyBox.html: docs/busybox.pod
+	-@ mkdir -p docs/busybox.net
+	-  pod2html --noindex $< > \
+	    docs/busybox.net/BusyBox.html
+	-@ rm -f pod2htm*
+
+# The nifty new buildsystem stuff
+scripts/mkdep: $(top_srcdir)/scripts/mkdep.c
+	$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
+
+scripts/split-include: $(top_srcdir)/scripts/split-include.c
+	$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
+
+.depend: scripts/mkdep
+	rm -f .depend .hdepend;
+	mkdir -p include/config;
+	scripts/mkdep -I include -- \
+	  `find $(top_srcdir) -name \*.c -print | sed -e "s,^./,,"` >> .depend;
+	scripts/mkdep -I include -- \
+	  `find $(top_srcdir) -name \*.h -print | sed -e "s,^./,,"` >> .hdepend;
+
+depend dep: include/config.h .depend
+
+include/config/MARKER: depend scripts/split-include
+	scripts/split-include include/config.h include/config
+	@ touch include/config/MARKER
+
+include/config.h: .config
+	@if [ ! -x $(top_builddir)/scripts/config/conf ] ; then \
+	    $(MAKE) -C scripts/config conf; \
+	fi;
+	@$(top_builddir)/scripts/config/conf -o $(CONFIG_CONFIG_IN)
+
+finished2:
+	@echo
+	@echo Finished installing...
+	@echo
+
+else # ifeq ($(strip $(HAVE_DOT_CONFIG)),y)
+
+all: menuconfig
+
+# configuration
+# ---------------------------------------------------------------------------
+
+$(ALL_MAKEFILES): %/Makefile: $(top_srcdir)/%/Makefile
+	d=`dirname $@`; [ -d "$$d" ] || mkdir -p "$$d"; cp $< $@
+
+scripts/config/conf: scripts/config/Makefile Rules.mak
+	$(MAKE) -C scripts/config conf
+	-@if [ ! -f .config ] ; then \
+		cp $(CONFIG_DEFCONFIG) .config; \
+	fi
+
+scripts/config/mconf: scripts/config/Makefile Rules.mak
+	$(MAKE) -C scripts/config ncurses conf mconf
+	-@if [ ! -f .config ] ; then \
+		cp $(CONFIG_DEFCONFIG) .config; \
+	fi
+
+menuconfig: scripts/config/mconf
+	@./scripts/config/mconf $(CONFIG_CONFIG_IN)
+
+config: scripts/config/conf
+	@./scripts/config/conf $(CONFIG_CONFIG_IN)
+
+oldconfig: scripts/config/conf
+	@./scripts/config/conf -o $(CONFIG_CONFIG_IN)
+
+randconfig: scripts/config/conf
+	@./scripts/config/conf -r $(CONFIG_CONFIG_IN)
+
+allyesconfig: scripts/config/conf
+	@./scripts/config/conf -y $(CONFIG_CONFIG_IN)
+	sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config
+	sed -i -e "s/^USING_CROSS_COMPILER.*/# USING_CROSS_COMPILER is not set/" .config
+	sed -i -e "s/^CONFIG_STATIC.*/# CONFIG_STATIC is not set/" .config
+	sed -i -e "s/^CONFIG_SELINUX.*/# CONFIG_SELINUX is not set/" .config
+	@./scripts/config/conf -o $(CONFIG_CONFIG_IN)
+
+allnoconfig: scripts/config/conf
+	@./scripts/config/conf -n $(CONFIG_CONFIG_IN)
+
+defconfig: scripts/config/conf
+	@./scripts/config/conf -d $(CONFIG_CONFIG_IN)
+
+clean:
+	- rm -f docs/busybox.dvi docs/busybox.ps \
+	    docs/busybox.pod docs/busybox.net/busybox.html \
+	    docs/busybox pod2htm* *.gdb *.elf *~ core .*config.log \
+	    docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html \
+	    docs/busybox.net/BusyBox.html busybox.links libbb/loop.h \
+	    .config.old .hdepend busybox
+	- rm -rf _install
+	- find . -name .\*.flags -exec rm -f {} \;
+	- find . -name \*.o -exec rm -f {} \;
+	- find . -name \*.a -exec rm -f {} \;
+
+distclean: clean
+	- rm -f scripts/split-include scripts/mkdep
+	- rm -rf include/config include/config.h
+	- find . -name .depend -exec rm -f {} \;
+	rm -f .config .config.old .config.cmd
+	- $(MAKE) -C scripts/config clean
+
+release: distclean #doc
+	cd ..;					\
+	rm -rf $(PROG)-$(VERSION);		\
+	cp -a busybox $(PROG)-$(VERSION);	\
+						\
+	find $(PROG)-$(VERSION)/ -type d	\
+				 -name CVS	\
+				 -print		\
+		-exec rm -rf {} \; ;            \
+						\
+	find $(PROG)-$(VERSION)/ -type f	\
+				 -name .\#*	\
+				 -print		\
+		-exec rm -f {} \;  ;            \
+						\
+	tar -cvzf $(PROG)-$(VERSION).tar.gz $(PROG)-$(VERSION)/;
+
+tags:
+	ctags -R .
+
+
+endif # ifeq ($(strip $(HAVE_DOT_CONFIG)),y)
+
+endif # ifeq ($(skip-makefile),)
+
+.PHONY: dummy subdirs release distclean clean config oldconfig \
+	menuconfig tags check test depend buildtree
+

extra/busybox-1.00/README

@@ -0,0 +1,127 @@
+Please see the LICENSE file for details on copying and usage.
+
+BusyBox combines tiny versions of many common UNIX utilities into a single
+small executable. It provides minimalist replacements for most of the utilities
+you usually find in GNU coreutils, util-linux, etc. The utilities in BusyBox
+generally have fewer options than their full-featured GNU cousins; however, the
+options that are included provide the expected functionality and behave very
+much like their GNU counterparts.
+
+BusyBox has been written with size-optimization and limited resources in mind.
+It is also extremely modular so you can easily include or exclude commands (or
+features) at compile time. This makes it easy to customize your embedded
+systems. To create a working system, just add /dev, /etc, and a Linux kernel.
+BusyBox provides a fairly complete POSIX environment for any small or embedded
+system.
+
+BusyBox is extremely configurable.  This allows you to include only the
+components you need, thereby reducing binary size. Run 'make config' or
+'make menuconfig' to select the functionality that you wish to enable.
+
+After the build is complete, a busybox.links file is generated.  This is
+used by 'make install' to create symlinks to the BusyBox binary for all
+compiled in functions.  By default, 'make install' will place the symlink
+forest into `pwd`/_install unless you have defined the PREFIX environment
+variable (i.e., 'make PREFIX=/tmp/foo install')
+
+If you wish to install hard links, rather than symlinks, you can use
+'make PREFIX=/tmp/foo install-hardlinks' instead.
+
+----------------
+
+Supported architectures:
+
+   BusyBox in general will build on any architecture supported by gcc.
+   Kernel module loading for 2.2 and 2.4 Linux kernels is currently
+   limited to ARM, CRIS, H8/300, x86, ia64, x86_64, m68k, MIPS, PowerPC,
+   S390, SH3/4/5, Sparc, v850e, and x86_64 for 2.4.x kernels.  For 2.6.x
+   kernels, kernel module loading support should work on all architectures.
+
+
+Supported C Libraries:
+
+   uClibc and glibc are supported.  People have been looking at newlib and
+   dietlibc, but they are currently considered unsupported, untested, or
+   worse.  Linux-libc5 is no longer supported -- you should probably use uClibc
+   instead if you want a small C library.
+
+Supported kernels:
+
+   Full functionality requires Linux 2.2.x or better.  A large fraction of the
+   code should run on just about anything.  While the current code is fairly
+   Linux specific, it should be fairly easy to port the majority of the code
+   to support, say, FreeBSD or Solaris, or Mac OS X, or even Windows (if you
+   are into that sort of thing).
+
+----------------
+
+Getting help:
+
+When you find you need help, you can check out the BusyBox mailing list
+archives at http://busybox.net/lists/busybox/ or even join
+the mailing list if you are interested.
+
+----------------
+
+Bugs:
+
+If you find bugs, please submit a detailed bug report to the BusyBox mailing
+list at busybox@mail.busybox.net.  A well-written bug report should include a
+transcript of a shell session that demonstrates the bad behavior and enables
+anyone else to duplicate the bug on their own machine. The following is such
+an example:
+
+    To: busybox@mail.busybox.net
+    From: diligent@testing.linux.org
+    Subject: /bin/date doesn't work
+
+    Package: BusyBox
+    Version: 1.00
+
+    When I execute BusyBox 'date' it produces unexpected results.
+    With GNU date I get the following output:
+
+	$ date
+	Fri Oct  8 14:19:41 MDT 2004
+
+    But when I use BusyBox date I get this instead:
+
+	$ date
+	illegal instruction
+
+    I am using Debian unstable, kernel version 2.4.25-vrs2 on a Netwinder,
+    and the latest uClibc from CVS.  Thanks for the wonderful program!
+
+	-Diligent
+
+Note the careful description and use of examples showing not only what BusyBox
+does, but also a counter example showing what an equivalent GNU app does.  Bug
+reports lacking such detail may never be fixed...  Thanks for understanding.
+
+----------------
+
+Downloads:
+
+Source for the latest released version, as well as daily snapshots, can always
+be downloaded from
+    http://busybox.net/downloads/
+
+----------------
+
+CVS:
+
+BusyBox now has its own publicly browsable CVS tree at:
+    http://busybox.net/cgi-bin/cvsweb/busybox/
+
+Anonymous CVS access is available.  For instructions, check out:
+    http://busybox.net/cvs_anon.html
+
+For those that are actively contributing there is even CVS write access:
+    http://busybox.net/cvs_write.html
+
+----------------
+
+Please feed suggestions, bug reports, insults, and bribes back to:
+	Erik Andersen
+	<andersen@codepoet.org>
+

extra/busybox-1.00/Rules.mak

@@ -0,0 +1,196 @@
+# Rules.make for busybox
+#
+# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+#--------------------------------------------------------
+PROG      := busybox
+VERSION   := 1.00
+BUILDTIME := $(shell TZ=UTC date -u "+%Y.%m.%d-%H:%M%z")
+
+
+#--------------------------------------------------------
+# With a modern GNU make(1) (highly recommended, that's what all the
+# developers use), all of the following configuration values can be
+# overridden at the command line.  For example:
+#   make CROSS=powerpc-linux- BB_SRC_DIR=$HOME/busybox PREFIX=/mnt/app
+#--------------------------------------------------------
+
+# If you are running a cross compiler, you will want to set 'CROSS'
+# to something more interesting...  Target architecture is determined
+# by asking the CC compiler what arch it compiles things for, so unless
+# your compiler is broken, you should not need to specify TARGET_ARCH
+CROSS           =$(subst ",, $(strip $(CROSS_COMPILER_PREFIX)))
+CC             = $(CROSS)gcc
+AR             = $(CROSS)ar
+AS             = $(CROSS)as
+LD             = $(CROSS)ld
+NM             = $(CROSS)nm
+STRIP          = $(CROSS)strip
+CPP            = $(CC) -E
+# MAKEFILES      = $(top_builddir)/.config
+
+# What OS are you compiling busybox for?  This allows you to include
+# OS specific things, syscall overrides, etc.
+TARGET_OS=linux
+
+# Select the compiler needed to build binaries for your development system
+HOSTCC    = gcc
+HOSTCFLAGS= -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+
+# Ensure consistent sort order, 'gcc -print-search-dirs' behavior, etc.
+LC_ALL:= C
+
+# If you want to add some simple compiler switches (like -march=i686),
+# especially from the command line, use this instead of CFLAGS directly.
+# For optimization overrides, it's better still to set OPTIMIZATION.
+CFLAGS_EXTRA=$(subst ",, $(strip $(EXTRA_CFLAGS_OPTIONS)))
+
+# If you have a "pristine" source directory, point BB_SRC_DIR to it.
+# Experimental and incomplete; tell the mailing list
+# <busybox@busybox.net> if you do or don't like it so far.
+BB_SRC_DIR=
+
+# To compile vs some other alternative libc, you may need to use/adjust
+# the following lines to meet your needs...
+#
+# If you are using Red Hat 6.x with the compatible RPMs (for developing under
+# Red Hat 5.x and glibc 2.0) uncomment the following.  Be sure to read about
+# using the compatible RPMs (compat-*) at http://www.redhat.com !
+#LIBCDIR:=/usr/i386-glibc20-linux
+#
+# For other libraries, you are on your own.  But these may (or may not) help...
+#LDFLAGS+=-nostdlib
+#LIBRARIES:=$(LIBCDIR)/lib/libc.a -lgcc
+#CROSS_CFLAGS+=-nostdinc -I$(LIBCDIR)/include -I$(GCCINCDIR)
+#GCCINCDIR:=$(shell gcc -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp")
+
+WARNINGS=-Wall -Wstrict-prototypes -Wshadow
+CFLAGS=-I$(top_builddir)/include -I$(top_srcdir)/include -I$(srcdir)
+ARFLAGS=-r
+
+#--------------------------------------------------------
+export VERSION BUILDTIME TOPDIR HOSTCC HOSTCFLAGS CROSS CC AR AS LD NM STRIP CPP
+ifeq ($(strip $(TARGET_ARCH)),)
+TARGET_ARCH=$(shell $(CC) -dumpmachine | sed -e s'/-.*//' \
+		-e 's/i.86/i386/' \
+		-e 's/sparc.*/sparc/' \
+		-e 's/arm.*/arm/g' \
+		-e 's/m68k.*/m68k/' \
+		-e 's/ppc/powerpc/g' \
+		-e 's/v850.*/v850/g' \
+		-e 's/sh[234]/sh/' \
+		-e 's/mips-.*/mips/' \
+		-e 's/mipsel-.*/mipsel/' \
+		-e 's/cris.*/cris/' \
+		)
+endif
+
+# Pull in the user's busybox configuration
+ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
+-include $(top_builddir)/.config
+endif
+
+# A nifty macro to make testing gcc features easier
+check_gcc=$(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; \
+	then echo "$(1)"; else echo "$(2)"; fi)
+
+#--------------------------------------------------------
+# Arch specific compiler optimization stuff should go here.
+# Unless you want to override the defaults, do not set anything
+# for OPTIMIZATION...
+
+# use '-Os' optimization if available, else use -O2
+OPTIMIZATION=
+OPTIMIZATION=${call check_gcc,-Os,-O2}
+
+# Some nice architecture specific optimizations
+ifeq ($(strip $(TARGET_ARCH)),arm)
+	OPTIMIZATION+=-fstrict-aliasing
+endif
+ifeq ($(strip $(TARGET_ARCH)),i386)
+	OPTIMIZATION+=$(call check_gcc,-march=i386,)
+	OPTIMIZATION+=$(call check_gcc,-mpreferred-stack-boundary=2,)
+	OPTIMIZATION+=$(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,\
+		-malign-functions=0 -malign-jumps=0 -malign-loops=0)
+endif
+OPTIMIZATIONS=$(OPTIMIZATION) -fomit-frame-pointer
+
+#
+#--------------------------------------------------------
+# If you're going to do a lot of builds with a non-vanilla configuration,
+# it makes sense to adjust parameters above, so you can type "make"
+# by itself, instead of following it by the same half-dozen overrides
+# every time.  The stuff below, on the other hand, is probably less
+# prone to casual user adjustment.
+#
+
+ifeq ($(strip $(CONFIG_LFS)),y)
+    # For large file summit support
+    CFLAGS+=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
+endif
+ifeq ($(strip $(CONFIG_DMALLOC)),y)
+    # For testing mem leaks with dmalloc
+    CFLAGS+=-DDMALLOC
+    LIBRARIES:=-ldmalloc
+else
+    ifeq ($(strip $(CONFIG_EFENCE)),y)
+	LIBRARIES:=-lefence
+    endif
+endif
+ifeq ($(strip $(CONFIG_DEBUG)),y)
+    CFLAGS  +=$(WARNINGS) -g -D_GNU_SOURCE
+    LDFLAGS +=-Wl,-warn-common
+    STRIPCMD:=/bin/true -Not_stripping_since_we_are_debugging
+else
+    CFLAGS+=$(WARNINGS) $(OPTIMIZATIONS) -D_GNU_SOURCE -DNDEBUG
+    LDFLAGS += -s -Wl,-warn-common
+    STRIPCMD:=$(STRIP) --remove-section=.note --remove-section=.comment
+endif
+ifeq ($(strip $(CONFIG_STATIC)),y)
+    LDFLAGS += --static
+endif
+
+ifeq ($(strip $(PREFIX)),)
+    PREFIX:=`pwd`/_install
+endif
+
+# Additional complications due to support for pristine source dir.
+# Include files in the build directory should take precedence over
+# the copy in BB_SRC_DIR, both during the compilation phase and the
+# shell script that finds the list of object files.
+# Work in progress by <ldoolitt@recycle.lbl.gov>.
+#
+ifneq ($(strip $(BB_SRC_DIR)),)
+    VPATH:=$(BB_SRC_DIR)
+endif
+
+OBJECTS:=$(APPLET_SOURCES:.c=.o) busybox.o usage.o applets.o
+CFLAGS    += $(CROSS_CFLAGS)
+ifdef BB_INIT_SCRIPT
+    CFLAGS += -DINIT_SCRIPT='"$(BB_INIT_SCRIPT)"'
+endif
+
+# Put user-supplied flags at the end, where they
+# have a chance of winning.
+CFLAGS += $(CFLAGS_EXTRA)
+
+.PHONY: dummy
+
+
+.EXPORT_ALL_VARIABLES:
+

extra/busybox-1.00/TODO

@@ -0,0 +1,11 @@
+Busybox TODO
+
+Stuff that needs to be done
+
+----
+tr - missing SuS3 features in busybox 1.0pre10 
+
+tr doesnt support [:blank:], [:digit:] or other predefined classes, [=equiv=]
+support is also missing.
+----
+ 

extra/busybox-1.00/_install/bin/addgroup

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/adduser

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ash

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/cat

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/chgrp

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/chmod

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/chown

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/cp

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/cpio

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/date

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/dd

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/delgroup

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/deluser

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/df

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/dmesg

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/dumpkmap

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/echo

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/egrep

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/false

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/fdflush

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/fgrep

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/grep

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/gunzip

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/gzip

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/hostname

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ip

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ipaddr

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ipcalc

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/iplink

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/iproute

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/iptunnel

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/kill

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ln

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/login

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ls

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/mkdir

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/mknod

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/mktemp

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/more

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/mount

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/mt

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/mv

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/netstat

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/pidof

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ping

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/ps

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/pwd

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/rm

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/rmdir

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/sed

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/sh

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/sleep

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/stty

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/su

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/sync

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/tar

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/touch

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/true

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/umount

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/uname

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/uncompress

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/usleep

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/vi

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/bin/zcat

@@ -0,0 +1 @@
+busybox

extra/busybox-1.00/_install/linuxrc

@@ -0,0 +1 @@
+bin/busybox

extra/busybox-1.00/_install/sbin/adjtimex

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/devfsd

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/fdisk

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/freeramdisk

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/fsck.minix

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/getty

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/halt

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/hdparm

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/hwclock

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/ifconfig

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/init

@@ -0,0 +1 @@
+../bin/busybox

extra/busybox-1.00/_install/sbin/insmod

@@ -0,0 +1 @@
+../bin/busybox